|
No Compromise!
Best performance 1/8th scale 4WD
“Ready To Run” racing buggy
The ISHIMA RAVE M1.0S is the entry-level version of the RAVE 1/8 buggy range.
Although we put the words “entry-level”, there is NO COMPROMISE been done. The RAVE M1.0S has the same performance in all conditions as the competition M1.0R version, only by using different production techniques we lowered the cost but not the performance.
The designers of ISHIMA RACING strove to have a strong, reliable and high performance 1/8 RTR buggy.
The overall weight of only 3380gr, the low center of gravity and the balanced load distribution provides outstanding driving dynamics and excellent track stability under any racing conditions.
The ISHIMA signature lay-down shock system and the optimized suspension geometries provides easy handling and precision controlability , no matter if you drive on flat fast tracks, bumpy technical tracks or sky-high jumps. The ISHIMA RAVE M1.0 will give you full confidence from the first moment you pull the throttle trigger...
Ball type front suspension
The ISHIMA racing design team adopted the well proven ball type front suspension to the RAVE M1.0S.
The ball type suspension system features:
- Easy adjustment of the camber
- Possibility to change the track (width) of the car
- Smooth and precise steering
- Increased suspension travel
- Increased steering travel
- Strong, reliable, slob free
- Less parts count
Chassis
ISHIMA racing’s design team choose for the RAVE M1.0S a smooth countersunk CNC-machined T6 grade aluminium chassis, instead of the mould stamped alloy chassis found on almost all RTR cars on the market.
The advantages of a CNC-machined chassis are
- Higher precision and better tolerances
- The aluminium is not been exposed to extreme stress on the material during production (pressure during stamping of the plates)
- Nice and clean machined edges (no rough borders)
Suspension Arms
The suspension arms are one of the most important parts on a model racing car and are exposed to extreme impacts during racing.
It was a big challenge for the ISHIMA racing engineering department to create lightweight but torsionfree suspension arms that can withstand the highest impacts during the long finals of a race and still provide the driver with a responsive feel. After a long period of testing, a special polymer mixture is been made to guarantee rigidity, reliability and performance.
Aluminium plates
All aluminium plates fitted on the RAVE M1.0S are CNC-machined in T6 grade aluminium. Non of the aluminium plates are mould stamped alloy as found on almost all RTR cars on the market.
The advantages of CNC-machined aluminium plates
- Higher precision and better tolerances
- The aluminium is not been exposed to extreme stress on the material during production (pressure during stamping of the plates)
- Nice and clean machined edges (no rough borders)
The RAVE M1.0S features:
- Alu T6 CNC-machined 3.5mm thick countersunk chassis
- Alu T6 CNC-machined 4mm thick front shock tower
- Alu T6 CNC-machined 4mm thick rear shock tower
- Alu T6 CNC-machined 3mm front suspension arm holder
- Alu T6 CNC-machined 3mm rear suspension arm holder
- Alu T6 CNC-machined 3mm servo saver plate
- Alu T6 CNC-machined 3mm center differential plate
- Alu T6 CNC-machined 3mm radio plate
Fully ballraced
The RAVE M1.0S is factory fitted with 26 high quality rubber sealed precision ball bearings.
ISHIMA racing’s design team refused to use the cheaper plastic or bronse bushings mostly found on the cheaper RTR cars, even on non critical moving parts.
Servo Saver
- Adjustable servo saver spring hardness
- Fully ballraced (4pcs rubber sealed precision ball bearings)
- CNC-machined T6 grade aluminium steering brace with multiple mounting points for different Ackerman
Clutch system
- 3-point racing clutch with 1.1mm Ø clutch springs
- CNC-machined T6 grade aluminium flywheel
- CNC-machined & hardened steel clutch bell
- Fully ballraced (2pcs rubber sealed precision ball bearings)
Differentials
When you talk “racing”, you talk “gears”. Spinning at more then 8000 RPM, ever changing speeds and increasing temperatures inside the differentials up to 80°C, the gears are a critical part in a racing buggy.
All gears in the RAVE M1.0S are made of a special metal mixture manufactured in high precision pressure casting moulds to guarantee strong, reliable and long lasting gears even under the toughest conditions.
The differential is fitted with 6 spider gears, the differentail casing is made of temperature resistant composite material. The differential outdrives are made of hardened steel.
The working of the differential can be adjusted by using silicon oil inside the differential ranging from 5000 CPS (soft) up to 100.000 (hard).
Universal drive joints
The RAVE M1.0S is factory fitted with hardened steel Universal drive shafts on the front wheels for smooth power transfer and optimum durability.
Shock stays
The front & rear shock stays of a buggy are exposed to hard impacts as they take the first shocks after a bad landing. They need to be strong to guarantee a perfect functioning of the shock absorbers.
The RAVE M1.0S front & rear shock stays are CNC-machined and made of 4mm thick T6 grade aluminium.
Shock absorbers
The shock absorbers need to operate smoothly to ensure a perfect damping, they have to be strong to absorb the constant impacts and they certainly may not leak oil. The ISHIMA shock absorbers are made of the finest aluminium and are machined with the highest precision to guarantee a perfect smooth functioning during the long main events.
The ISHIMA shocks features:
- Hardcoated in and outside surface treatment
- 1 piece aluminium shock cap
- CNC machined DELRIN shock piston (perfect roundness)
- Super soft silicon shock bladder
- 2 pcs first grade silicon O-rings
- Aluminium end-cap with rubber dust protection
- Hardened super smooth shock shafts
Hex hubs
17mm Hex hubs retained with pin and grub screw for maximum durability and easy maintenance.
Chassis stiffener
The RAVE M1.0S is fitted with a rear & front composite chassis stiffener.
Anti roll bars
The RAVE M1.0S includes front & rear anti-roll bars for controlled chassis roll.
Electronics assembly
The electronis assembly in 1 piece can be easely and quickly removed for servicing and cleaning. Only remove a few screws and the electronics assembly can be removed. The very easy to access radio box protects the receiver and battery from dust and dirt. The radio box is big enough to accept todays receivers as well Li-Po batterypacks or 4 or 5 cells Ni-xx batterypacks
Fuel tank
125ml fuel tank with large quick fill system. The fuel tank is fitted with a internal fuel filter.
Aerodynamic wing
The aerodynamic wing is studied to give the right downforce at low as well high speeds. The wing is moulded from a very flexible composite mixture, all edges are reinforced to prevent cracking or shearing, making this wing almost unbreakable.
The wing support is specially designed and moulded from a very flexible composite mixture to be able to bend and flex after heavy shocks. The wing holder offer many different wing mounting positions. This enables to adjust the wing and the downforce to the different track situations.
The RAVE M1.0S offers a wide range of tuning adjustments. All suspension parameters are easily adjustable and can be fine tuned to the track condition and your personal driving style
Features:
- Adjustable front track
- Adjustable lower front suspension arm
(caster & wheelbase)
- Adjustable lower upper arm (caster & anti-dive)
- Adjustable front camber
- Adjustable steering geometry (Ackerman)
- Adjustable front shock position
- Adjustable front anti-roll bar
- Adjustable wheelbase
- Rear inboard toe angle adjustment (0° to 3°)
- Rear outboard toe angle adjustment (0° to 1.5°)
- Adjustable upper arm (caster)
- Multiple mounting points rear wheel hub
- Adjustable lower front suspension arm (anti-squat)
- Adjustable ride-height
- Adjustable shock absorber spring tension
The ISHIMA RAVE M1.0S RTR is factory fitted with a .25 size engine with a userfriendly pull start system.
The M.25 size ISHIMA engine is easy to start, easy to tune and provides plenty of power and torque.
|
|
|
|
7.0mm fully metal slide carburator for optimum throttle response and lowered fuel consumption.
|
Machined large aluminium
heatsink for optimum heat
dissipation.
|
|
|
|
|
Large dual stage air filter.
|
Black powder coated exhaust pipe and header.
|
|
The RAVE M1.0S is supplied as a “Ready To Run” car. Although RTR cars are mostly fitted with cheaper electronics to cut down the cost, we at ISHIMA racing selected higher quality components as the RAVE M1.0S is not just a RTR buggy, but a pure racing buggy “out of the box”
The car is factory fitted with: Pistol grip FM radio
Features:
- Digital proportional FM system
- Dual rate adjustment for the steering
- EPA adjustment Left & Right steering
- EPA adjustment Throttle & Brake
- Servo reverse function
- Charging jack
- 6 kg high torque steering servo
- 6 kg high torque throttle / brake servo
|
